Why wont the LCD cable stay in?

Question

iPhone 4

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

Michael @michael38911

Rep: 125

6

2

Publicado: 31 de may. de 2015

Opciones

Why wont the LCD cable stay in?

Hi, I am replacing the screen and home button on my iPhone 4. The LCD cable is long enough to go in its socket, and looks like it should fit, but it does not pop in, and keeps sticking straight upwards. Any thoughts ?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Agregar un comentario

2 Respuestas

Solución Elegida

Brad @brad80191

Rep: 24.4mil

35

16

30

Publicado: 31 de may. de 2015

Opciones

Remove the rubber bumper from the top of logic board, it may not be installed correctly. Fold the flex cable properly, many have the dotted lines where it should be folded.

Fue útil esta respuesta?

Sí No

Puntuación 0

1 comentario:

It turned out that the cables weren't folded properly. In the end I also had to use more force that I thought to get the cable to go in, but now all is well and iPhone is fixed.

31 de may. de 2015 - de Michael

Agregar un comentario

It turned out that the cables weren't folded properly. In the end I also had to use more force that I thought to get the cable to go in, but now all is well and iPhone is fixed. — Michael