Saltar al contenido principal

gas in the oil

how does gas get into my oil tank? I filled up the gas tank, and next day most of the gas had gotten into the oil, when I drained the oil it was mostly gasoline...

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 4
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

2 Respuestas

Solución Elegida

barbchenoz,

I have a craftsman model 247.288841 19.5 horse riding mower with a Briggs one cylinder engine. It was a cast-off from a relative who was tired of taking it in to get the "gasoline in the oil" problem fixed. The last repair actually worked, but by then my sister-in-law was exasperated with it and gave it to me. The problem is the in the carburetor. It has a solenoid in the bowl which shuts off the flow of gas when the ignition is switched off. The design is faulty - the solenoid does not completely shut off the gas and so it allows a siphon action to empty the bowl into the intake manifold. The raw gas then leaks down the cylinder wall and into the crankcase. The repair shop gave up trying to fix it and installed a manual cut-off valve in the fuel line. You have to remember to open the valve before you start the engine and close it when you shut the engine off. I've been looking for a way to modify the carburetor to stop the siphon problem, but have not found a way to do it so far. In the meantime, the manual valve allows me to use the mower without ruining the engine. Don't run yours with gas in the oil - it thins the oil and will damage the engine. Hope this helps.

Fue útil esta respuesta?

Calificación 4

Comentarios:

How to fix it if you forget to shut off the valve? Drain the oil is the first thing. Do you also need to replace the fuel filter? Thanks.

por

Agregar un comentario

Hi

Is this a 2-stroke or 4-stroke engine?

On a 4-stroke it could happen, gasoline is running down the cylinder walls if mixture is way to rich.

But then will notice gas in the oil ... just a few millilitres so to say.

If it is a 2-stroke, gas and oil will be mixed before entering the cylinder, I think, and I would have a look if there 's a broken valve or something, so that gas can run down the oil line, if the engine is off.

Regards, Stone

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

barbchenoz estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 83

Últimos 7 Días: 550

Últimos 30 Días: 2,703

Todo El Tiempo: 43,503