Repara tus cosas Comunidad Tienda

A handheld, user-friendly electronic label maker manufactured by Brother.

Preguntas 2 Ver todo

Opciones

My unit wont turn on

I already replaced the ac adapter with a new one and the machine still won't turn on. I don't use the unit with batteries at all as it drains the batteries very quickly.

the screen remains blank. any suggestions?

Update

so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter. I also tested my adapter with my dvd player and it worked. So now I know what the problem is but can this be fixed? It looks fine to me; is not loose or broken.

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
2 comentarios

i have the PT-D600 that wont turn on, or do anything at all..

- de

Brother pulled an Apple on me and reversed the polarity on their 9v adapter. I made an adapter adapter (I call it an unadapter) so the center pin is the negative and now my generic 9v ac adapter works.

Pay attention to the (+)-c-(-) symbol beside the voltage requirement.

- de

Agregar un comentario

4 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

noosheen, start by opening it up using these guides. Then use a multimeter and plug your power adapter in. Measure the voltage on the solder points of the jack on the logic board. It is possible that it has broken off, that you have colder solder joints or that the jack itself has failed.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Opciones

REFER TO THESE it seems

SOMEONE MAY HAVE DROPPED IT. SOMETHING SEEMS BROKEN.

Brother PT-D200 Troubleshooting

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

Remember the power adapter must be center pin negative, most adapters are center pin positive, look closely where the adapter plugs in.....there is a small symbol that shows center pin negative

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

I have bought 2 adapters and both do not turn on the machine. I have also put in 6 brand new batteries and still won't turn on.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

I just had this problem too. It worked great last time I used it. Plugged it in this morning and it won't turn on with the adapter. I put in batteries, still won't turn on. Any solution?

- de

Same problem for me too.

- de

Agregar un comentario

Añadir tu respuesta

noosheen estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 22

Ultimos 30 días: 77

Todo El Tiempo: 6,201