Why won't volume controls or lock button work after replacing battery

I replaced my battery and lightning connector and after putting everything back together the following won't work: lock button, volume controls, vibrate switch on side, and vibrate. What should I check to fix these problems? Possible magnetic and non magnetic screws in the wrong spots? Is there a diagram of where non magnetic screws go?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

Ever fixed something? That’s Genius.

Share your repair story with #ImAGenius

Todos somos Genios

Share your repair story with #ImAGenius

1 Respuesta

Solución Elegida

If you removed your logic board during the process, may be you did not properly reconnect the audio control cable.

Follow this guide until step 16, then jump to step 21 where you are instructed to remove the "button assembly cable." Disconnect then reseat it, and test your phone.

Imagen iPhone 5 Audio Control and Power Button Cable


iPhone 5 Audio Control and Power Button Cable


Fue útil esta respuesta?

Calificación 1


The non-magnetic screw attaches at the top right corner of the shield (which has 3 screws in all). That's the shield that covers the screen assembly cables.


Agregar un comentario

Añadir tu respuesta

derekbailey88 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 43