Saltar al contenido principal

Pantalla iPad Mini de 7.9 pulgadas, con 16, 32 o 64 GB de almacenamiento.

Preguntas 630 Ver todo

Resistor values near battery connector

Does anyone know the value of the resistor (capacitor? I've seen it labeled as both but neither post had values) circled in the picture. Caught it with a fingernail and now the battery charging indicator won't update. I'm reasonably good at smd soldering - just need to order the right part!

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 4
1 comentario

I have same problem with my old iPadmini, but I can not find a inductor 240ohm 0.2A, would you please advise the inductor can be replace by a SMD resistor 240ohm too?

- de

Agregar un comentario

2 Respuestas

Solución Elegida

Aaron Teter, that is reference designator FL7500. It is a 240Ohm 0.2A filter (fixed inductor) in a 0201 package. Something like this will work.

Fue útil esta respuesta?

Puntuación 5

2 comentarios:

Just wondering how you figure this information out. Your answers are always useful. Thanks for your help.

- de

Can you please tell me if i can take this filter out from diffrent device.I have iphoen 5s,6 and ipad 3 monther board.If yes can you please guide me.

- de

Agregar un comentario

You have a lot of exposed ground plane here. Cover that with a conformal coating before replacing your filter. Don't allow any solder to adhere to that ground and short your gas gauge line

Fue útil esta respuesta?

Puntuación 2

1 comentario:

Someone make jumper? Give some idea please.

- de

Agregar un comentario

Añadir tu respuesta

Aaron Teter estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 2,260