Repara tus cosas Comunidad Tienda

El iPhone 5c de Apple fue anunciado el 10 de septiembre de 2013. La reparación de este dispositivo es similar a los modelos anteriores, y requiere destornilladores y herramientas de entrometimiento. Disponible como GSM o CDMA / 8, 16, 32 GB / Blanco, Rosa, Amarillo, Azul y Verde

Preguntas 1234 Ver todo
Pregunta Cerrada

Opciones

Digitizer isn't working & LCD has lines

I own a repair shop and this is the second phone i've seen with this issue. A customer brings in a phone for a normal screen repair. The screen has lines on the left side of the LCD and the digitizer doesn't work at all. Both phones were in cases and both weren't dropped hard in fact it was on carpet. I replace the screen and it still has lines and digitizer doesn't work. After 4 screens i notice the lines are in the exact same place every time. I have no idea whats causing it or how to fix it. I need any help i can get.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Maybe you need to check the screen FPC connector on the motherboard. If broken, replace it.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Ive never heard of the FPC connector.

- de

Agregar un comentario

Opciones

This is a common problem with the iPhone 5C, it is caused by the digitizer connector on the logic board. It is a connector that has no metal clips at the ends causing it to be a weak connector.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

thank you very much but that doesn't explain the lines on the LCD.

- de

I'm pretty certain this is the problem I have, I have recently replaced the screen and it immediately was acting erratic and unresponsive and is now even worse, I also put the previous screen back on and the same is occurring so I'm guessing connector damage. Although looking at it it doesn't appear damaged at all, is it possible there is no visible problem with the connector but it still be the culprit or may it be due to something else? If so is it worth replacing the connector?

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 9

Todo El Tiempo: 209