Repara tus cosas Comunidad Tienda

Preguntas 2522 Ver todo

Opciones

Black layer between glass and LCD

I have just got a LCD separator machine and have had a go on a couple of broken screens, but have been unsuccessful.

The link below is a picture of two iPhone screens which shows that i have cut into the black/tinted film/layer on the LCD with the cutting wire.

  • Is this layer the touch-registrating part of the screen? What is it's function?
  • And what are the best approach when 'slicing through' with the wire to avoid this? Have i just tilted the wire downwards against the LCD when cutting..?
  • Do i pull the wire slightly upwards towards the glass when separating?

Any help greatly appreciated

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

I'am having the same problem as you oyvindrosmer but since this post dates back to 2015 I was wondering to know if you have found a replacement for this layer?

thanks

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Is this layer the touch-registrating part of the screen? What is it's function?

> the black film on top of the screen is the Polarizing Layer, it's a thin film that gets put on on top of the touch sensor.

And what are the best approach when 'slicing through' with the wire to avoid this? Have i just tilted the wire downwards against the LCD when cutting..?

>You can remove the polarizing film and add a new one as long as you use the OCA method and have all necessary machinery. Using the LOCA method, you have to be very careful and pull the wire evenly and steadily from left to right without too much force.

Do i pull the wire slightly upwards towards the glass when separating?

You shouldn't have to, but most techs will most likely pull up slightly towards the end, sometimes it goes flying.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Can't I use the LCD without this film? Every time I've separated glass, I ended up with half of film on the LCD.

- de

Agregar un comentario

Añadir tu respuesta

oyvindrosmer estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 22

Todo El Tiempo: 2,092