Saltar al contenido principal

Modelo A1312 / Mediados de 2010 / 3.2 GHz Core i3 o 2.8 y 3.6 GHz Core i5 o 2.93 GHz Core i7, ID iMac11,3

Preguntas 382 Ver todo

replace optical bay with 9.5mm HDD enclosure?

Hey guys,

I'm wondering if it's possible to take out the optical drive on my new i7 iMac and add an SSD boot drive using the 9.5mm HDD enclosure.

any tips appreciated. If the iMac actually has the same optical drive specs as Apple's laptops, this should be possible.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

I see no problem with it except possible warranty voiding. But it can always be removed for service.

Fue útil esta respuesta?

Puntuación 2

3 comentarios:

So I suppose the question is will the 9.5mm enclosure fit into the 27" iMac? iFixit doesn't list the iMac as compatible, but that might just be an oversight.

- de

I just went through the iFixit teardown and it's actually a 12.7 mm bay, so I'd just use the 12.7 mm SATA Optical Bay SATA Hard Drive Enclosure. Mmm.. good! Am looking forward to using SSD as a boot drive.

- de

Agregar un comentario

Añadir tu respuesta

earthvital estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,798