Saltar al contenido principal

Reparación y soporte para los controladores que se enviaron con la PS3. Lanzado en noviembre de 2007 (solo en Japón) y 2008 (otros países), el controlador alimentado por batería de litio de seis ejes (CECHZC2) es fácil de reparar.

Preguntas 156 Ver todo

My Dualshock 3 Controllers mini usb broken and not charging?

My controllers mini usb port has broken and it is not charging ....How do i replace the port ps. i konw how to solder etc and i have an woring port i can replace it with

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

2 Respuestas

Respuesta Más Útil

I've never replaced the USB on a dual shock before but I have repalced many USB connectors on phones. Shouldn't be any different. Your soldering knowlage should carry you to success.

Before you do any work on it make sure you do your research as well as just looking at how the board and usb are soldered. Disassemble the remote and just take a look at it. Take pictures of the current USB and board for reference. Pre heat the area and make sure you have plenty of flux to keep the heat flowing to the right place.

Good luck on your repair.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

Did you figure out how to do this, because I would like to know how with step by step instructions like you did on the dualshock4 controller.

if you know please email me a pta_red_robin@hotmail.com

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

rmeiring estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 4,049