Una consola de videojuegos producida por Sony Computer Entertainment, anunciada por primera vez el 20 de febrero, en 2013 y lanzada el 15 de noviembre en 2013.

Preguntas 888 Ver todo

What are the measurements of the thermal pads and how many?

I'm looking to change the stock thermal padding for the GDDR5 RAM etc. but I don't know the measurements of each piece or how many individual pads I'll have to cut.

It makes me more comfortable knowing exactly what I'll need. No one has this question's answer on Google so you'll be setting the milestone.

Edit. Are there thermal pads covering things other than the RAM? If so, where, how big and how many? Thanks!

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

2 Respuestas

Solución Elegida

These pads are approx. 9mmx9mm you can just make them 10mm x 10mm though since there is plenty of room to make them bigger.

Here are a few pics.

Block Image

Block Image

Fue útil esta respuesta?

Calificación 7

Comentarios:

Thanks for the answer! Do you know how many 10x10mm pieces there are? Are there any pieces that are different measurements? If so, how many?

por

There are 8 on the top side and 8 on the bottom side. There are no other thermal pads on this motherboard.

por

I'm looking to do this as well but doesn't the thermal pad need to be the correct thickness ? I'm guessing something like 2 mm would do but I'm not sure.

por

They are 1mm.

por

Thanks for the reply by the way, I just got around to opening up my ps4 and I'm glad I did. Three of the factory thermal pads were hardly even on the memory chip, they were off to the side touching the motherboard like it was slid into place rather than placed down. Also it had way to much thermal compound on the apu. It was a mess.

por

Mostrar 3 comentarios más

Agregar un comentario

Hi Alex

I just teardown my PS4 which is CUH-10XXA on 07/29

Don't know is it too late to share this information with you.

At the beginning I use 2.0mm to replace the thermal pad, and then I turn on my PS4,

but the height is too high so the APU can not touch the heatsink with 3 beep

After that, I use the 0.8mm instead of , so far the machine is ok.

Block Image

Fue útil esta respuesta?

Calificación 0

Comentarios:

I am searching through the web, still cannot find any leads for the thickness except for your post. I am changing pads on my PS Pro. Do you think 0.1 cm or 1mm works?

por

Agregar un comentario

Añadir tu respuesta

Alex Fung estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 12

Últimos 7 Días: 53

Últimos 30 Días: 250

Todo El Tiempo: 5,436