Rep: 71
1
1
So my start and select buttons cracked, no problem went and got a set from my local repair store for $5, now the problem I'm having is that when I install these new black start and select buttons, both like to get stuck down after I press them once and they don't go back up. My home button does not do this even with the replacement button. Any ideas?
Es esta una buena pregunta?
Rep: 97
2
2
I was actually just having the same problem, which is how I ended up stumbling upon your question. After a lot of frustration, I realized that the two little tabs on the rear of the button were being blocked from sliding all the way into their receptacles because a little bit of plastic had bent to block the opening. Once the openings were cleared the button worked properly again.
Hopefully this photo makes things a bit clearer: http://i.imgur.com/SuYXBe5.jpg
Just make sure there's nothing blocking the slots circled in red.
Fue útil esta respuesta?
THANK YOU SO MUCH, my god this was the most frustrating thing ever and now it's fixed thanks to you! THANK YOU. :O
Haha, I know the feeling. I nearly drove myself mad spending hours trying to reseat the buttons over and over again before I realized this.
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 3,139
