Saltar al contenido principal

Modelo A1136 / disco duro de 30, 60 u 80 GB / frente de plástico negro o blanco

Preguntas 797 Ver todo

Dock melted a spot on cover and smells like burnt. Won't hold charge

I had placed my iPod to charge on a docking station. Noticed battery was dead when looking closely at it it had a spot on the front cover like it got too hot and melted. Took it to apple they said all is fine inside but not to use the same dock again and that the battery just got way to hot when charging. Not holding a charge now and my iPod is all I have with my music, pc crashed don't want to hinder loosing my music. Can anyone help me I'm afraid to ruin it.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

6 Respuestas

Respuesta Más Útil

I would agree that it was a bad answer problem stands that being I am a lady I just got the brush off when I asked questions about replacing the battery and if it would work after doing so. Guess I wasn't good looking enough.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Bad answer from Apple. Get some good looking young lady to take it to Apple and get them to replace the unit.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Sounds like your dock cooked the battery.

The high thermal energy from the dock most likely heated out the ions in the electrolyte of the battery, no ions, no charge.

Only option is to replace the battery.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Thank You for you responce that helps me understand I will do just that and change my battery. Greatly Appreciated. Bea

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I have replaced the battery an still dies quickly. Thanks for the insite. greatly appreciated.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

since the replaced battery still dies quickly, the logic board - or the dock connector - has one or more parts shorted together/toasted/bbq'ed. finding that part shouldn't be the problem - but replacing it would be pretty hard. you need someone who does component level repair every day - maybe you will find someone in your area (but i don't know if you could find those people in the yellow pages)

good luck

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

classy50s estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 6

Todo El Tiempo: 1,284