Saltar al contenido principal

Quinta generacion de iPhone. La reparación de este dispositivo es fácil y requiere destornilladores, herramientas de hacer palanca, y paciencia. GSM/CDMA /16, 32, o 64 GB / Negro o Blanco.

Preguntas 3046 Ver todo

water damaged iPhone isn't working after replacing and cleaning (isopr

I replaced the battery, logic board, cameras, speaker, antenna and cleaned the contacts or the whole parts in isopropanol over night. Let it 2 days for dry and put them together yesterday.

By connecting with my Notebook the connection/synchronisation was working. So I could see my music and photos. But the screen stayed black and I could not enter the pin.. While the connection the signal sounded constantly. Where is the problem? Do I need a new battery or new speakers? What can I do now?

Thank you in advance,

bne

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

bne, sounds like you need a new display. Of course, it is also possible that you have shorted out the backlight circuitry on the logic board. Start with a new display assembly and reevaluate. You mentioned in your question that you already replaced the battery, so no reason to replace it again.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

bne estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 67