Saltar al contenido principal

Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 250 Ver todo

Trying to repair power button flex cable

This is my first attempt at repairing an iPad 2. The problem was a bad LCD screen. Everything was pink.

I removed the digitizer, and shattered it in the process. No problem, purchased a replacement. I also severed the power, volume, and mute ribbon cable. No problem, purchased another one. However, it seems I am missing a board? I am confused because I never took any boards out....

The bottom end of the ribbon cable appears to need to be connected to something, and the top part, just below the camera appears to have a cable that needs to go into it. I have attached pictures for better reference.

Here is the replacement cable that was ordered:

http://imgur.com/CaWaAcc

http://imgur.com/DJ0mdtc

Here is an overview of the inside (should there be a board just below (above in the pic) the Li-ion symbol?):

http://imgur.com/04RTj0I

There is a pot here for a cable end, but I do not see that end on this cable?

http://imgur.com/reL4UCV

Again, it appears something is missing..

http://imgur.com/vcTwwB8

From anther angle:

http://imgur.com/JoJQYAP

Any help would be extremely appreciated.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

It appears your ipad is a cdma version you have a power cable for a gsm version

here is the cable you need

Block Image

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

David Walter estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 160