Saltar al contenido principal

La tercera generación de la serie phablet de Samsung Galaxy Note se lanzó el 25 de septiembre de 2013. Identificable por el número de modelo N9005.

Preguntas 248 Ver todo
Pregunta Cerrada

no power, battery has been tested, battery loop?

Got the phone wet....soaked it in rice for 2 days....phone kicked on for about a hour then looked like it short circuited out a line went through the screen and now will not power on at all.....the phone will power on to a battery loop then instantly die when the charging cable is plugged in. Any ideas?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Use the tear down guide and use a soft brush to go over all connections and other metal parts (such as mounting plates ect.) with isopropyl alcohol. Also dip the logic board in it, brush softly and let all parts dry. Reassemble it with a new battery and hope you didn't short it.

With any water damaged device you should do this, and I would have suggested leaving it in the rice for a week, though something like silica would have been better.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Jared, skip the rice. The "rice trick" is one big myth. Placing your phone in rice is equivalent to doing nothing. It does not prevent any kind of corrosion or fixes your phone. The best thing to do is to stop using the device, (remove the battery) and to totally disassemble it.Take a look at this teardown and see if you are up for it. Once you have your phone disassembled clean it with +90% isopropyl alcohol. This will displace the water and stop corrosion. It it okay to submerge a board in isopropyl alcohol. Check this guide to show you how to do it. It was written for an iPhone but all the points are still pertinent to your phone as well. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. You mentioned that you checked the battery, but unless you have sophisticated testing devices (not a multimeter to test voltages) there is no way to get a proper perfomance test. Then re-assemble with a new battery This is not optional but a must to avoid failure later on. " Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.

Imagen de iPhone

Guía

Reparación de los daños en un iPhone debido a la entrada de líquidos

Dificultad:

Difícil

1 - 2 hours

Imagen de Samsung Galaxy Note 3

Guía

Samsung Galaxy Note 3 Teardown

Dificultad:

Moderado

10 - 30 minutes

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 375