Saltar al contenido principal

Micromax Canvas 2 Plus A110Q is a dual-sim Android smartphone by Micromax Mobile launched in May 2013.

Preguntas 12 Ver todo

Does not charge if kept on?

My Micromax Canvas 110Q is just 7 month old and now it does not charge when phone is ON. After switching OFF the phone it will charge, but someties it shows low battery after full charging. Restarting again will show battery as 100%. I had installed DU Battery saver app from the start. Can it be the software problem and should I uninstall the DU app?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 13
8 comentarios

how did u fix it. same problem for me also

- de

Above same problem here , my phone is micromax a110 canvas 2, it is purchased in 2013, charging problem when mobile is switch on but start to charge when it kept off.

please send me the sollution. Service center in Sangli (Maharashtra) also unable to solve my problem.

Please help.

Santosh Waghmare

7875969379

- de

I am also struggling with same problem with Micromax Canvas A110. It charged only in switch off mode. If anyone got solution to this problem, please share

- de

I have a same problem like above with my Huawei G mini which I used for last 1.5 years. Now it does not charge when phone is on but it charged if the phone is off. please help me with this issue.

- de

Mostrar 3 comentarios más

Agregar un comentario

11 Respuestas

Respuesta Más Útil

1. Download and install MTK engineering app from play store

2. Open it

3. Go to Hardware testing

4. Go to USB

5. Go to USB IF Test

6. In the first four options...do start and stop

7. Now go back and press on UART/USB switch

8. Here choose UART radio button

Now count 1....2....3....4....5... And your phone will be charging now

Fue útil esta respuesta?

Puntuación 15

21 comentarios:

You are Awsmmm Bro.

You just made my day ....:)

Thanks a lot this F**nin works (y)

- de

It worked for me in Micromax canvas spark 2

- de

It works TY Dude . and can you tell us how you got this idea ??

- de

Thanks lot.. It is works.. Very nice..

- de

Thank you bhaai its working..,Now just only one problem how to install new apps every time it showing error that insufficient storage.

- de

Mostrar 16 comentarios más

Agregar un comentario

That would be my first guess, try uninstalling and let us know what happens.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Did you see what happens when you disconnect the battery from the logic board and then reattach it?

- de

Agregar un comentario

same problem here , i have not installed any saver app but facing the same problem.Mobile is charging in switch off mode only, what can be the reason please tell ASAP ?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

same case with me on unite2 plz help;no batterysaver app or anything! hope it works after somet ime!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

hi guys,

my micromax a110Q , 1year old.

Started hanging & auto on off.

After restoring factory set up & updating soft ware . its dead.

No charging, totally black screen.

can some body suggest a way out.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

I have installed in Canvas 2.2 and battery is not charging as usual, if you remove battery and put. Is it necessary to update mtk engineering tool ?

- de

Agregar un comentario

Above same problem here , my phone is micromax a110 canvas 2, it is purchased in 2013, charging problem when mobile is switch on but start to charge when it kept off.

please send me the sollution. Service center in Sangli (Maharashtra) also unable to solve my problem.

Please help.

Santosh Waghmare

7875969379

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

the same problem with me i could not charge my micromax a110q when is on and if i switch off my mobile and plug in for charge it become charge. please send your answer on my e-mail: suryapurbia1@rediffmail.com

- de

Same problem with my micromax A110 from last 2 days. i also purchased in 2013. plz mail me solution on nchitikant@gmail.com

- de

Agregar un comentario

This was firmware bug lately patch by micromax in new updates. Check new updates from micromax if updates not available then try to flash custom firmware but you have to root it before going further.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Smith Can you tell me how to flash frimware and root micromax a110 phone I have the same problem of not charging when power is on.

- de

Agregar un comentario

My Micromax Canvas 110Q is just 7 month old and now it does not charge when phone is ON. After switching OFF the phone it will charge, but someties it shows low battery after full charging. Restarting again will show battery as 100%. I had installed DU Battery saver app from the start. Can it be the software problem and should I uninstall the DU app?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

1. uninstall DU battery first.it sucks out your battery more.

2. Check out the charging port ..it may be filled with dust and lint...try cleaning it with a safety pin

[ NOTE: be careful not to damage the port ].

3. Now try restartin it.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Go to a Mobile Mechanic do not Spoil ur time here....

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Hi, have you performed a battery recalibration? To be honest no one battery apps are good, they just cancel some logs from your device (in few words) Here is how to perform a battery recalibration.

How to calibrate a smartphone battery: Let the device reach 0% and let it shut down till you can not even turn it on

Connect the battery rechargerwall and let the device reach 100% battery without turn it on.

Once the device reached the 100% battery let it connected for other 2 hours (without turn it on)

Once the 2 hours are passed with the rechargerwall battery connected to the electricy, turn on your device for 20 min, after that turn it off.

Once you turned off the device disconnect the rechargerwall from the wall then disconnect the usb data cable from rechargerwall battery. After that reconnect the usb data cable to the rechargerwall battery and then reconnect the rechargerwall battery to the wall electricity

This operation should be repeated for 3 days in a row. Do not perform this operation more than 3 times in 2 months.

Let me know

Fue útil esta respuesta?

Puntuación 0

1 comentario:

I have micromax canvas tab which now a days becing a problem it doesnt charge properly

If it is charged it goes complete dead

I hv to connect the charger nd then use

If i am onning also the flash comes later within a seconds it goes off y it is so and any suggestion for it

- de

Agregar un comentario

Añadir tu respuesta

Sudipta Ray estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 14,277