Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

Preguntas 425 Ver todo

After home button repair, unresponsive touch screen

I replaced the home button & cable on a Sprint iPhone 4. Everything went fine, I didn't run into any obvious issues. After reassembly/connecting the battery, the phone turned on. The locked home screen appears when it's plugged in to a power source, but the home button is unresponsive and the touch screen is unresponsive. So I'm stuck, not sure what to check for on this one.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Open phone again and make sure the connections are seeded on the lcd and digitizer if they are and still unresponsive touch you have damaged it make sure you didn't crimp the digitizer cable against frame when reinstalling ..

As for the home button make sure you have the little latch pushed down or it could be just a faulty button flex

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

MargotJoniec estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 181