Saltar al contenido principal

Una lavadora de Maytag con una tasa baja de satisfacción del cliente y una tasa alta de fallas.

Preguntas 212 Ver todo

Squeaking noise when start up on Maytag Bravos Quiet Series 300 dryer?

The dryer is squeaking when beginning a cycle

After it is warmed up or in use for a few minutes it seems to not be as bad

Is there an easy troubleshooting method?

Could it be a bearing or is it a belt?

Where do I begin?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 6
Agregar un comentario

2 Respuestas

Respuesta Más Útil

I find your photos of a repair on a GE dryer interesting, but this is not the same design as the Maytag (Whirlpool) dryers. The Bravos 300 series are very similar to the Maytag Neptune series.

To replace the two wheels (located inside the rear of the dryer) on which the dryer drum rides - these do wear out depending upon frequency of machine use and size/weight of the loads. The front of the Maytag machine must be removed, then slide the drum out, and use a ratchet with socket to remove the two wheels with their holding bolt. A kit containing all the necessary parts can generally be purchased through an appliance parts center for about $40-50. Be sure to have your model number when ordering/purchasing the parts.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

It's probably a worn out drum bearing. Here's a pictorial guide on replacing one: http://marksprojects.wordpress.com/2009/...

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

rick estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 8

Todo El Tiempo: 16,962