Repara tus cosas Comunidad Tienda

Modelo A1224 / mediados de 2007 y principios de 2008/2, 2,4, o 2,66 GHz Procesador Core 2 Duo

Preguntas 548 Ver todo

Opciones

Logic Board or Power Supply or Hard disk Failure?

Hi all,

My iMac EMC 2210 is unable to boot at all.

Trying to find out whether it's a logic board or power supply failure.

I have just replaced my hard disk approximately 1 year ago but I am not writing it off the equation.

Pressed the power button but has no chime nor visual.

I could hear the fan sound (but couldn't be sure if it's the fan or hard disk).

Any guidance is greatly appreciated.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
4 comentarios

Update / Additional Info

I left the iMac off for a couple of hours and managed to boot it for now.

Is it overheating ?

- de

Can you give us the last three digits of your systems serial number so we can correctly identify your system.

- de

Hi Dan,

Thanks for the prompt reply.

Last 3 digit of serial is ZE3

Model 1224 , EMC 2210.

Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

- de

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs

Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

To check if the system is over heating you'll need to install an app which can read the fan & temp sensors in your system. Give this app a try: Temperature Gauge Pro There are others but I have found this one to be one of the best. Let us know what you find after running it.

Fue útil esta respuesta?

Sí No
Puntuación 1

10 comentarios:

Hi Dan, Thanks for the prompt reply. Last 3 digit of serial is ZE3 Model 1224 , EMC 2210. Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

Chee Yong Koo, 11 hours ago

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

- de

Starting to should like your power supply has issues. At this point I think you'll need to open the system up to inspect things. Are you up to that? Review the IFIXIT guides and setup your work area if you haven't already.

- de

Yes, I am ready to open up. Any guide is appreciated.

- de

Thanks for the guide.

I have no issues replacing the hardware as required but the main issue here is that I couldn't rectify if it is a Power Supply failure or Logic Board.

Any ideas?

- de

Mostrar 5 comentarios más

Agregar un comentario

Añadir tu respuesta

Chee Yong Koo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 273