LCD not working after ssd installation

Question

iMac Intel 21.5" EMC 2389

Modelo A1311 / mediados de 2010 / 3.06 y procesador Core i3 de 3.2 GHz o procesador Core i5 de 3.6 GHz

Preguntas 342 Ver todo

delbracht @delbracht

Rep: 1

Publicado: 6 de may. de 2014

Opciones

LCD not working after ssd installation

Hi there,

after succesful installation of a ssd, I damaged display data cable and afterwards the the lcd of my imac stays black. Computer is booting and running normal, an external display shows picture.

Diagnose LED4 stays black, all others are green.

I already bought a new display data cable and a new backlight inverter board but both with no result - the lcd stays black.

No i´m wondering what it could be, because I don´t want to buy a new lcd if it´s not necessary and I already spent a lot of money with no result.

Every help is very much appreciated.

Sorry for my bad english, I´m from germany ;-)

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Agregar un comentario

2 Respuestas

TommyJames337 @tommyjames337 Rep: 2mil 14 35 · Answer 1 · 2014-05-06T06:36:59-07:00

TommyJames337 @tommyjames337

Rep: 2mil

14

35

Publicado: 6 de may. de 2014

Opciones

It is unfortunately very common for people to damage either their display cables or the actual display cable connector on the logic board. I can only speculate because I cannot examine it myself, but I would be willing to bet that you accidentally damaged the connector on the logic board, which could possibly require professional soldering skills to repair.

Does the connector look damaged at all? If the connector looks fine, try to examine the pins inside it. Are any of them bent or out of place?

If you look at the guide to remove the display, iFixit warns that the display data cable and display data connector are very easy to damage, and in the comments below, other people agree.

Fue útil esta respuesta?

Sí No

Puntuación 0

Agregar un comentario