Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo

Why isn't my Home button Not Working?

I resently took apart my phone. I manage to put every thing back and it works. but The home button isn't responding at all. I need help! oh I also Switched the motherboard with an 8gb so no i have a 16gb with an 8g housing.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

I would first check the contacts of the home button - maybe the are bent a little bit

Fue útil esta respuesta?

Puntuación 2

5 comentarios:

Do you Know what i should Do because I dont want to remove the Black covering(home button)

- de

I think that there are not so many options left - imho - disassembling is the only option

- de

I think i may of found out the problem. The prongs that deal with the home button isnt touching the other prongs on the speaker system. Hmm just a little pressure in areas will get it moving but soon failed Suggestions?

- de

I would try to bend them a little bit

- de

If anyone is still looking here is what I have found.

1. After replacing the lcd/digitalizer or rear cover ensure alignment with home button prongs is accurate.

2.Ensure both prongs are intact and are in a position to reach the motherboard gold contacts when closed.

3. Also (and my issus was) ensure connector labeled "4" is connected, this is the flex cable connection the home button to the motherboard. Best of luck

iGuru Technologies

- de

Agregar un comentario

Añadir tu respuesta

Steven Bolds estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 6,523