Saltar al contenido principal

CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

Preguntas 424 Ver todo

Replaced LCD Now have Black Screen

I was repairing the LCD on a Iphone 4 CDMA and unplugged the LCD connector before the battery. I hooked it back up and the screen was black. The phone was on you could see the back light and you could hear it. I tried two other screens and the same except the last one the screen was a little gray. Did I do permanent damage to the logic board? I have tried the reset and it did not work.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

2 Respuestas

The iPhone is not so vulnerable.

You can try to unplug and plug the connector of battery.

Fue útil esta respuesta?

Calificación 0

Comentarios:

yes like stated installed two more LCDs and none of them worked. I have see on repair videos a warning about unplugging the LCD first could cause damage want to know if this is true what damage has been done.

por

Agregar un comentario

Is your iPhone iOS 5 If so then you will need to update to iOS 7 and the screen will work..

New screens don't work on iOS 5

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Kage estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 137