Saltar al contenido principal

Modelo A1419 / Finales de 2013 / 3.2 y 3.4 GHz Procesador Core i5 o 3.5 GHz Core i7, ID iMac14,2

Preguntas 340 Ver todo

screen hinge loose tilts

Is possible to tighten the iMac screen hinge without completely dismantling the computer. some claim a plastic card pushed in above hinge with release a clip allowing asscess to torx screws ?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 5
2 comentarios

Any news on this?

- de

I made a fix for this. www.themachack.com

- de

Agregar un comentario

2 Respuestas

Solución Elegida

Simple solution: A rubber crutch tip placed between the monitor and the stand holds the monitor position securely and can be very easily adjusted in about 5 seconds. Cost: $0.29.

Fue útil esta respuesta?

Puntuación 5

3 comentarios:

Simple fix: A rubber crutch tip to support the screen is infinitely adjustable. Mine has been in place at least six months with absolutely no problem.

- de

Yep,worked a treat

THANKS

- de

What is a rubber crutch tip? Is it the piece that goes at the bottom of the pole of crutches? I’m trying to imagine how that would work.

- de

Agregar un comentario

The newer iMacs have a newer foot design.

Your idea of a plastic card was the means to gain access to the foot screws to replace it for a VESA mount on the early '12 and older units. Sorry won't work here.

Here's some background: iMac 27" stand removal.

Given the age of your system I would try going to Apple for repairs.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

scoot estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 22

Ultimos 30 días: 75

Todo El Tiempo: 13,198