Repair and disassembly guides for the Jura Capresso IMPRESSA J5 coffee maker.

Preguntas 10 Ver todo

The machine just doesnt power up anymore.

No lights or nothing after plugged in and power on. Is there a fuse? Where should I begin in troubleshooting the board?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

2 Respuestas

Respuesta Más Útil

Use this great teardown as a way to get to the logic/control board. I do not have the J5, but other Jura manuals and they all show a fuse on the circuit board. Once you take yours apart, post an image of the board and I am sure we can assist you further. Hope this helps, good luck.

Fue útil esta respuesta?

Calificación 1

Comentarios:

I am facing the same issue, my Jura J5 does not power anymore. Thank to your video, I was able to open it, and found two fuses behind the plastic shield. They are OK. I inspected every visible electronic parts, I did not found anything. Are there any other fuse ? Maybe on the top logic board (the one with the rotary switch - I did not had time to open it up) ?

por

Found the fuse, in the rear bottom left. But it is ok. Problem is somewhere else ....

por

Agregar un comentario

As oldturkey03 said I would suspect the fuse first. Mine too was not powering up and when it did it would not recognizing the tray being in place. I took it apart looked for any easy electronic problems: fuse, burnt areas indicating over heating or failed electrical components / short, loose electrical connections etc. Never found what the exact problem was but something may have been loose because after doing the above and putting it back together it worked:)

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Ronald Massaro estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 9

Últimos 7 Días: 45

Últimos 30 Días: 204

Todo El Tiempo: 5,983