Repara tus cosas Comunidad Tienda

Pantalla de 7.9 pulgadas / Modelo A1432 / Disponible en blanco o negro / Anunciado el 23 de octubre de 2012/16, 32 o 64 GB de capacidad

Preguntas 220 Ver todo
Pregunta Cerrada

Opciones

iPad Mini can't get past apple logo after screen repair

I have repaired a few ipad minis and never had problems. This one though, is killing me.

I removed old digitizer, took out old lcd, unplugged battery, but new digitizer back in, put lcd back in, plugged battery back in and went to power up to test.

Apple logo, awesome! but then after several seconds on the logo, it fades out pretty quick and reboots the ipad and does it all over again.

Ive tried other digitizers, i've double checked everything I could, tried restore (error 9), etc. Made sure no debris anywhere inside causing a short.

Any ideas?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0

1 comentario:

Tried a new battery just to see.. same result :(

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

I doubt that the digitizer is what is causing the issue. It's likely something else.

The first thing I would do to troubleshoot:

Restore the iPad in iTunes (hopefully you have a backup) you may need to place the iPad in DFU mode to get the restore to work.

Let me know how this goes!

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Already tried restores as mentioned in both regular and DFU modes, still no luck. Same "fade out" apple image right as it appears to be copying over the files

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 9

Todo El Tiempo: 296