Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 330 Ver todo

Sleep / Wake Button Not Responding

I accidentally tore the flex cable when replacing the screen.

The old cable was removed and a replacement installed.

The sleep / wake button does not respond. However, when I press Volume Up or Volume Down it takes a picture. So is it the power / sound / mute flex cable or the logic board or the power flex cable connecting the logic board to the motherboard?

Or?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Solución Elegida

Thomas,

I would guess that it's a bad cable. I would try a replacement from a different supplier. Or send the one you have back and see if you'll get a replacement.

I doubt it's the logic board. I would unplug the cable and then plug it back in and test. Look at the contacts on the connector, see if there are any signs of damage.

That's my best advice. You'll have to do some troubleshooting from here.

I hope that helps you some!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Hi,

Its definitely a bad adjustment of flex cable. Try not to go for a cheap flex as cheap flex usually have this kind of problem. I would suggest you to let a technician change a flex this time for you.

Good Luck

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Thomas Garbarz estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 623