Saltar al contenido principal

Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 250 Ver todo

Wifi Question after Digitizer replacement

Ipad II

Issue: Digitizer Replacement / wifi issue.

I replaced the Digitizer on an Ipad 2. When I went to test the wifi I realized I had ruined the Wifi antenna. I replaced the wifi antenna. I don't have the ipad completely shut, just close to shut. The digitizer is resting on the rest of the Ipad. The Wifi isn't working right now after replacing the antenna. I seem to remember that most apple products tend to have mechanisms to prevent it from working 100% when open. For example when I replaced the digitizer on my Ipad I the wifi didn't work until the digitizer was firmly sealed onto the ipad. Does the ipad need to be completely shut to get the wifi to work?

I'm afraid to shut it because the digitizer was hard to get off.

When I say the Wifi doesn't work I mean it's not detecting any networks at all. I'm at an office building, there should be at least 15 networks.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
1 comentario

We'll I'm closing it right now, so lets see what happens

- de

Agregar un comentario

1 Respuesta

Solución Elegida

Yes, close it. It should work.

Fue útil esta respuesta?

Puntuación 1

3 comentarios:

does the Wifi Antenna need to stick to the digitizer at all? Or is screwing it in enough?

- de

We'll I'm closing it right now, so lets see what happens

- de

Well dang, it worked

- de

Agregar un comentario

Añadir tu respuesta

adammiller7 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 341