Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo
Pregunta Cerrada

iPhone 3G internal mic stopped working

Dear all,

I opened my iPhone yesterday to try to fix a broken vibrating module. This was not working due to a previous (successful) operation fixing a constantly switching in & out of silent mode problem rendering the phone un-usable.

I was following the guides on here but was still way more rough that I had liked (I was trying to lift up underneath the silver bevel). I also noticed a spark created from my metallic screwdriver (bad idea! I know!) at the spot shown in the attached photo.

After an unsuccessful attempt at fixing the vibrator, I closed up the iPhone and now the internal microphone doesn't work! What could be wrong?

- it's hard to imagine the spark (probably from shorting a capacitor used to apply the high burst current needed for the vibration) is the cause since it is on a different board than the microphone module and everything else on the phone seems to work fine.

- Broken micro-connector no. 4? But charging the phone and sync'ing it to my computer works fine. All of these connections are made from the docking module to the main board via this connector. It would be very unlucky for just the 2 connections for the microphone to break here.

- the microphone itself? It's hard to see the transducer breaking. And the connections and soldering appear to be fine (they seem quite robust).

So I am completely lost as to what to look for and what to test for! Maybe my logic is wrong somewhere, I don't claim to be an electronics expert at all. Can anyone offer suggestions as to what could be broken and what tests I can do? I have access to most electronic equipment available at my lab (scope, multimeters, power-supplies, etc...).

Thanks in advance,

voice-less iPhone user.

Block Image

http://farm5.static.flickr.com/4035/4499...

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

3 Respuestas

Solución Elegida

try to search the "sparking" area with a magnifier - look out for something burnt or broken-

since the mic was working before the "bzzzt" it's most likely a problem produced by the screwdriver incident

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Try to clean the contacts.

-Me-

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Sounds like it might be a mechanical problem as you mentioned from the "bzzzt". Just in case, try this -- it worked for me:

http://bluescreensolutions.blogspot.com/...

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 4,892