I need to purchase the 30 pin LVDS socket for this tablet's connector.

Question

tabletas gráficas

Información de reparación de tabletas gráficas. Las tabletas gráficas también se conocen como digitalizadores, tabletas de dibujo, blocs de dibujo, tabletas de dibujo digital, tabletas de lápiz o mesas de trabajo digitales.

Preguntas 48 Ver todo

Yor1001 @yor1001

Rep: 23

1

Publicado: 13 de mar. de 2013

Opciones

I need to purchase the 30 pin LVDS socket for this tablet's connector.

Stupid me bent a few pins in the lvds socket of a wacom 21 UX. I was since scouring the web to replace the socket that was broken, but came up empty handed.

Maybe someone could point me in the right direction. I've added photos of both the connector and the socket.

The socket seems to have a pitch of about .5mm also the connector seems to be a really small Dupont connector. (I can't find what this is called)

The lcd model is: nl160120bc27 by NEC.

The Connector.

Connector Again

Socket.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 1

2 comentarios

any chance you could post an image of the connector and its location on the circuit board? Any numbers on your LCD panel that will help us to identify as much as possible?

13 de mar. de 2013 - de oldturkey03

The recepticle seems to be something like this.

http://www.digikey.com/product-detail/en...

right angle surface mount pin connector.

I think it's a .5mm pitch instead of 1 though.

15 de mar. de 2013 - de Yor1001

Agregar un comentario

1 Respuesta

Solución Elegida

oldturkey03 @oldturkey03

Rep: 782mil

1.1mil

893

2.3mil

Publicado: 15 de mar. de 2013

Opciones

Yor1001, according to the datasheet for your panels it is a DF19G-30P-1H (59 or 99) (Hirose Electric Co., Ltd. (HRS)) available at places like this or even on here. Download the datasheet for the connectors from here. Hope this helps, good luck

Fue útil esta respuesta?

Sí No

Puntuación 1

6 comentarios:

Thank You!!! That's definitely it!!! I forgot to check the datasheets... DUH. (I have it downloaded too)

16 de mar. de 2013 - de Yor1001

Thank you for accepting my answer. Best of luck to you.

16 de mar. de 2013 - de oldturkey03

EDIT!! May I ask where did you find this connector in the datasheet, I've did a search and couldn't find any results?

16 de mar. de 2013 - de Yor1001

It is in the datasheet for your LCD. It shows the importance of posting as much information as possible.

16 de mar. de 2013 - de oldturkey03

Yeah, I found it in the datasheet, it does show the importance or posting info. (I did post the pictures but did't realized I had to insert them into the posting), thanks again, just ordered the parts, now I hope I don't damage the pads more than how they are already damaged.

17 de mar. de 2013 - de Yor1001

Mostrar 1 comentario más

Agregar un comentario

any chance you could post an image of the connector and its location on the circuit board? Any numbers on your LCD panel that will help us to identify as much as possible? — oldturkey03
The recepticle seems to be something like this.

http://www.digikey.com/product-detail/en...

right angle surface mount pin connector.

I think it's a .5mm pitch instead of 1 though. — Yor1001
Thank You!!! That's definitely it!!! I forgot to check the datasheets... DUH. (I have it downloaded too) — Yor1001
EDIT!! May I ask where did you find this connector in the datasheet, I've did a search and couldn't find any results? — Yor1001
It is in the datasheet for your LCD. It shows the importance of posting as much information as possible. — oldturkey03
Yeah, I found it in the datasheet, it does show the importance or posting info. (I did post the pictures but did't realized I had to insert them into the posting), thanks again, just ordered the parts, now I hope I don't damage the pads more than how they are already damaged. — Yor1001

tabletas gráficas

I need to purchase the 30 pin LVDS socket for this tablet's connector.

1 Respuesta

Añadir tu respuesta