Repara tus cosas Comunidad Tienda

Modelo A1224 / mediados de 2007 y principios de 2008/2, 2,4, o 2,66 GHz Procesador Core 2 Duo

Preguntas 548 Ver todo
Pregunta Cerrada

Opciones

Display not working, even after buying a replacement.

As far as I can tell, the machine works just fine. When I boot it up, I can hear the fans start, and the start up sound plays every time, but the display stays off/black. The first three LEDs on the logic board light up.

About a month ago, I went into an Apple store, and they told me it was the display, and that it would run for about $400 to replace, so I checked, and I found a display for 1/4 of that elsewhere. After buying that, and reconnecting it, same problem.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

There are several possible "fixes" first ensure that reassembly went 100% according to the Guide. Many problems are traced back to connectors that were not connecting... ribbon cables not inserted far enough, wrong side up, cams not locked down, box connectors that were not evenly and completely seated.

Other possibilities: LED #4 lights to indicate that the computer and the LCD display panel are communicating, since your's doesn't light that could be an inverter or nicked/cut cable issue.

If this Answer is helpful please remember to return and mark it Accepted.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

I double checked that it was the right part (M201EW02), and after a large looking over, the only issue I found was that the temperature sensor for the LCD display had a nicked wire. I also noticed that there was no HDD temperature monitor. Besides these two things, nothing else seemed wrong.

All this aside, it may be the inverter, but when I took it out, it didn't smell/look off to me.

- de

Agregar un comentario

Opciones

first off you need to make sure you have the correct replacement part.

Then check to see if ifixit.com has a teardown guide on that model.

check ifix it 's answer section for tips on reinstallition of that part for that model. I have a iPhone that when you order some parts for it, the white colored phones have different parts than the black phones even though they are the exact same phone by name. also google your orginal symtoms see what is on the web about that problem.

but it sounds like you may need someone with a couple of installs under their belt to help you with this one. i only answered to maybe help you do one or two things you may not have thought of while you are waiting for a experienced tech to reply to your question. also, look very very closly at the old screen beside the new one see if the parts match up to be an exact copy? and check for a connector you may have forgotten you unplugged when you took it out.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

Try reseating the video card

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 249