Repara tus cosas Comunidad Tienda

Unibody de aluminio de 13", procesador Core 2 Duo de 2.0 o 2.4 GHz.

Preguntas 574 Ver todo
Pregunta Cerrada

Opciones

Keyboard Ribbon not locking in.

I had issues with my trackpad the left half was not clicking smoothly when i would click So i took my computer apart way more than i needed to but when i go to disconnect the keyboard ribbon i did not unlatch it first it was a bit hard but it did come out. Now when i try to put it back in and lock it i can just touch it and it come out. Its so loose i am not able to turn my computer on, i think, because of this.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

Its no longer locking the ribbon i can take it out as if it was unlatched

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

There is a small latch on the rear (facing the display side of your machine) black connector that you plug the keyboard into on the logic board. Carefully lift it and insert the keyboard cable. After the cable is seated lock it back in place. Hope this helps.

Fue útil esta respuesta?

Sí No
Puntuación 1

4 comentarios:

I have but it doesn't stay in. I tap it and it will pop out even when locked.

- de

It isn't being pushed in far enough. These cables are a little tricky to work with. You'll need a little leverage to ensure it has been pushed in. You shouldn't see any copper if it's seated properly.

- de

That did it it wasn't in all the way it took more force to put it in there than i thought. Thank you very much!

- de

Glad I could help!

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 342