Saltar al contenido principal

Screen lights up but no picture, phone works but screen is black

Had a broken home button which I've just replaced today but after reassembly the phone appears to be dead when power button is pressed.

It will eventually start and the screen goes from being completely black to a lit up black when home or the power button is pressed, its recognized by iTunes and will sync so all seems to be working fine except the screen.

any ideas what the problem may be?

or have I broken the screen accidentally during repair

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 3
Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

2 Respuestas

Respuesta Más Útil

try holding the power and home button for 10 seconds to force your phone to restart. if that doesn't fix it then open the phone up again and check under the wifi antenna and make sure the data cable for the display is securely pressed down. if it is then you damaged the display and need to replace it.

Fue útil esta respuesta?

Calificación 3

Comentarios:

Tried holding home and power, still no difference, will fully take apart and reassemble again and see if I have any luck.

Thanks for the reply

por

Agregar un comentario

Sorry to be the one with the bad news Zeruel but your going to need a new front screen assembly, you either flexed your LCD while prying it from the mid frame and damaged it or damaged your LCD-Digitizer ribbon cables assembling it, its real easy to do, good luck.

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Añadir tu respuesta

Zeruel estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 9

Últimos 7 Días: 49

Últimos 30 Días: 259

Todo El Tiempo: 25,106