Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo
Pregunta Cerrada

iPhone keep restarting after disassemble

Hi,

I had a question recently due to i need to change my side volume adjustment so i disassemble & after i assemble back my phone start up with apple logo. abt 3 to 5 mins it came out the running cycle behind the logo awhile it restart again.

i had restore with itune was sucess but after a while it repeat again of restarting.

i also did disassemble another iPhone due to changing of battery & assemble back & it same thing happen as above mention,

Is there something wrong with my assemble or is it hardware problem/some parts broken/some parts i did not install properly.

Please help.

Rgds

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

I would make sure all of the connections are properly seated. It sounds like the logic board is faulty, but it is unlikely that two logic boards were damaged in this same way, which makes me think something is not connected properly.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,882