Saltar al contenido principal

Quinta generacion de iPhone. La reparación de este dispositivo es fácil y requiere destornilladores, herramientas de hacer palanca, y paciencia. GSM/CDMA /16, 32, o 64 GB / Negro o Blanco.

Preguntas 2189 Ver todo

Vibrate Switch Stripped Screw Help

Please refer to the following manual for the screw I am referring to:

iPhone 4S, Headphone Jack Cable, Step 32

The screw head is stripped. Im looking for a way to get this thing out and replace it. Drilling and tapping is out I assume because its so dang small. Any help would be appreciated.

Thanks

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Solución Elegida

If you hold the back of the phone and push up while pressing down to loosen the screw. A small flat tip precision screwdriver typically works.

Superglue will work. I always prefer the Gel type.

I keep a bottle of ScrewGrab in the shop, you can find it on Amazon.

Fue útil esta respuesta?

Puntuación 2

1 comentario:

You guys rock. Thanks for the tips. Ill give them a shot.

- de

Agregar un comentario

You could try using super glue or a similar epoxy to bind it to your screwdriver, then replace the screw with a new one. I suggest something along the lines of JB Weld or Loctite. As it's a small area to work with I suggest applying the epoxy to the screwdriver first, not the screw to prevent overflow/spilling onto nearby components! Good luck!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ryan estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 336