Saltar al contenido principal

Mediados de 2006 / número de modelo A1181 / carcasa negra o blanca / procesador Intel Core Duo de 1,83 o 2,0 GHz.

Preguntas 418 Ver todo

How do you put it back?

There are 3 pieces of plastic under the key and 1 piece of metal. When I removed the key the plastic around the pressure pad remained in place as did a small piece hinging on the back of the key. I can get the metal clip to hook into place top and bottom and the key to click onto the plastic around the pressure pad, but I don't know what to do with the [-shaped plastic and the bottom part of the enter key does not respond.

Thanks,

Stephen

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

5 Respuestas

Solución Elegida

The picture:

How do you put it back?

was v. helpful, but the twin plastic tails you see pointing up and the metal hooks are in different positions on mine. There appear to be different variants even for the same key type.

Just for ref, in mine, underneath the tail part of the key are 2 plastic components. The square one appears to hinge underneath the key cap. The [-shaped bit in fact goes this ] way around just outside metal hooks.

It appears fixed.

Stephen

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Respuesta Más Útil

http://www.thebookyard.com/images/manual...

http://www.irithm.com/Mac.key.replacemen...

Fue útil esta respuesta?

Puntuación 2

1 comentario:

+1 Ralph

- de

Agregar un comentario

Basically you need to line it up exactly and push firmly.

Another option you have is to take it to an Apple store and they'll do it for free, they'll even replace a broken hinge- free of charge.

Fue útil esta respuesta?

Puntuación 0

3 comentarios:

Sorry but you have to slide the key down a bit before clipping.

- de

I've never had to do that

- de

Unless you mean down as in up and down, not as in down as in towards you

- de

Agregar un comentario

I get how to put back the top half of the key, but not how or where the [-shaped piece of plastic goes in the bottom part of the key. I should mention that this return key is the US '9' shaped style, not a horizontal bar. The tail-part is the problem.

Stephen

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Please look at this pict:

Block Image

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Stephen estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 851