Repara tus cosas Comunidad Tienda

Modelo A1288 / 8, 16 o 32 GB de capacidad

Preguntas 451 Ver todo
Pregunta Cerrada

Opciones

New LCd screen grey white only but old screen works, why?

Hi,

I have a B serial number itouch 2G with a faulty/cracked LCD screen. It still displays but has lines on it. So I ordered a new 2G LCD screen and fitted it but the new screen just shows a grey white display!

Interestingly, the new screen when fitted to my C serial number itouch 2G works perfectly and when I refit the old cracked screen to my B serial number Itouch 2G it also displays but with the lines on it.

Is there some hardware differences between the LCD screens for B and C serial number itouch 2G? Or is this a firmware issue? Please help!Can't seem to find a solution!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

well that LCD works in ALL 2nd Gens and 3rd Gens. So might be an obstruction in the LCD port where you plug it in causing a short or something. I would suggest blowing that area with a air bottle and inspect the ribbon on the end just to make sure its clean. And if same issue try to attempt a DFU mode restore and see how it goes.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Thanks for the reply. Its an unusual problem that I have. I don't think it is a short or cable contact issue as the old screen works and displays correctly except for lines where it has been damaged BUT the new screen just gives a white grey appearance like olden days TV static. Then when I refit the old screen, it does display as it should.

However, the new screen then works perfectly when fitted to my C serial number itouch which is why I am wondering if there is any diffrence between screens of B and C serial itouches.

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 355