Saltar al contenido principal

El sistema operativo de Apple para sus computadoras portátiles y de escritorio Mac.

Preguntas 69 Ver todo

How do I reboot my MacAir after disk replacement?

I just went through the step by step instructions for replacing the HD in my MacAir. Now how do I boot the computer with no external drive?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

Try the following:

Press the start button

and immediately press the: O+F+Command+Option keys, all at the same time,

and HOLD them until the Terminal screen appears.

This will have some lines of text, with a flashing cursor at the end.

Type in "boot_mac" (without the quote marks), and press Return/Enter key.

The normal startup screen should appear.

Hope this helps, Regards, Karel

Fue útil esta respuesta?

Puntuación 0

3 comentarios:

Addition!! The "boot_mac" must have the " _ " dash between boot and mac at the bottom, not at the centre of the line.

- de

ADDITION AGAIN!!!!! IF THE ABOVE DOES NOT WORK:

Instead of "boot_mac" , use "mac-boot". Done all this a long time ago and forgot

the exact word order. Sorry.

- de

Thank you so much for your inputs, when I do that all I get is a flashing "file folder" and no terminal screen. Have I screwed it up?

- de

Agregar un comentario

Añadir tu respuesta

theherm11 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 459