Saltar al contenido principal

Quinta generacion de iPhone. La reparación de este dispositivo es fácil y requiere destornilladores, herramientas de hacer palanca, y paciencia. GSM/CDMA /16, 32, o 64 GB / Negro o Blanco.

Preguntas 2189 Ver todo

Repaired display stopped working after a small drop, causes?

I repaired my 4s screen a couple weeks ago from a cracked screen, and everything was working fine. The other day, I dropped it from a few feet and then the display and touchscreen stopped working. The phone still turns on and I can hear it vibrating and it rings when I get calls. Do you think it could be as simple as a connector coming undone,or will I have to order a new display assembly? Also, I may be wrong, but I think the microphone may have stopped working too--when I activate Siri, it makes the end noise before I can say anything.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
1 comentario

what probably happened was that the way it landed because IPhones have sensitive spots and maybe it fell on one of them.

- de

Agregar un comentario

2 Respuestas

Respuesta Más Útil

Yes, check and carefully re-seat the connectors, reseat all of them to see if you can get Siri working too.

Fue útil esta respuesta?

Puntuación 2

1 comentario:

I would also try a hard reset first.

- de

Agregar un comentario

The connector has come dislodged from the board. Some ofd the after market parts don't snap down really good and they do not have the foam pads that the other connections do. This leaves a little room between the connector and the emi shield allowing the connector to pop loose. I started installing a foam shim on top of the new lcd/ digitizer connections and have not had this issue since.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Alec Martschenko estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 500