Saltar al contenido principal

IPad 2 GSM con 16, 32 o 64 GB de almacenamiento y un procesador Dual Core A5. Número de modelo A1396. La reparación es complicada y requiere calor y palanca.

Preguntas 150 Ver todo
Pregunta Cerrada

power flex replacement problem

i ripped the power flex replacing my ipad 2 screen so i replaced it with a new one

now testing my ipad i notice all the button are responsive except the power button the only time it seem to respond is when i hold the power button down to turn off the device ,the power button does not let me turn on or off the screen.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

I am having this exact same issue with an iPad 2. Tomorrow morning I am going to try a new cable to see if that fixes it.

- de

Agregar un comentario

4 Respuestas

Solución Elegida

Hi,

There are 2 options:

1st-You didnt connect good the replaced pwr button flex cable

2nd-May be you damaged this lcd board on the ipad right upper corner:

Block Image

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

or just a bad cable, what happens a lot. So try to get another and replace it.

What you could do is jailbreak your device and use activator to lock your screen.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Yes ,activator is also solution but after some time it sucks.

- de

Agregar un comentario

hi there, i'm having the same issue... replaced screen and power/volume flex all buttons work fine, exept the powerbutton, works only when you turn the divice on or off, screenlock doesn't work even assistif touch doesn't work to lock the screen... the only possibility in my case would be the lcd board i think... I did not really toucht the lcd board because im really carefull with it butt is it possible to damage it when cutting the sticker that holds the connection from the power/volume flex ?

thx

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Hi:

i have a problem whit the same flex but..now volumen boton´s dont work and keep showin the volumen icon on the screen and cant use it....i tryed whit alot of new flex and the same result..i did try to take out the flex and leave it whit out flex but..when i do that the ipad wont gave image(like LCD problem)

can some one help me or there´s some one whit the same issue?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,416