How do I remove the Touch Screen/ Bezel without breaking it?

If you do use the flathead make sure to insert between the metal frame and rubber gasket, and not touching the glass at all. Once the metal touches the glass it's *crack* (think comic book "pow" type here).

I find the small metal spudger from ifixit to work best. No nicks, bends, etc. perfect open almost every time.

Some frames will break and some glass will break. It's just the nature of this repair. It is not unreasonable to get in without breaking 95% of time with some practice (although a good level would be any not broken - this is not easy so don't get down)

I've broken my share of glass (4 to be honest) and today I was able to remove one without breakage. I have used the plastic tools and have broken those, the trick there is use to use the plastic tool coming in from the outside of the IPOD instead of from over the IPOD.

I didn't have one of the plastic tools today so I used an utility knife blade with the sharp blade covered with a guard (paper and scotch tape) and the back side inserted into the IPOD. I also use a suction cup (the kind used in bathrooms to hold washcloths and such) to keep the glass from sinking back down.

Go REEEAAALLL slow and be careful not to break that LCD.

First, you have to take off the battery right away. And then you can try to separate the back cover using a screwdriver and some other repair tools.

SPAM removed

why I can't use the camera of Ipod touch apple

The screen is black when I touch the camera?

get a srewdriver ster it in the charger slot and push up no damage on the screen if u pushed are plz dont your !@#$ will be done dnt