RESUELTO:Faulty MagSafe DC-In Board? - MacBook Pro 13" Unibody Early 2011

Faulty MagSafe DC-In Board?

I have a problem get the charger to my Macbook Pro 13" 2011 working, have bought three chargers which all is still working on other Macbooks, but only work rarely on mine.

It have never been dropped or in any harms way and the chargers have always been plugged in with surge-protected plugs.

Could this be the MagSafe DC-In Board or should I look into other tests or parts? Tried everything I can come up with without changing any parts.

Thanks in advance,

Claes

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Publicado: 27 de sep. de 2012

Opciones

Yes - if you are having charging problems it could be the DC in board, it might also be your battery. Look at Utilities:System Profiler->Power and see what it can tell you about the status of the battery and charger.

If this answer was helpful please remember to return and mark it Accepted.

Fue útil esta respuesta?

Sí No

Puntuación 2

1 comentario:

Thank you for your answer. The battery seems fine in the profiler (300 cycles), and the charger works very well when it is working at all. Noticed that it sometimes stop charging when the MBP is moved.

Found an apple service provider that is willing to do a check for errors with no cost so I will do that and share their findings here.

1 de oct. de 2012 - de Claes Olofsson

Agregar un comentario

MacBook Pro 13" Unibody Early 2011

Faulty MagSafe DC-In Board?

1 Respuesta

Añadir tu respuesta