Repara tus cosas Comunidad Tienda

Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 250 Ver todo
Pregunta Cerrada

Opciones

Screen not working after fall, But digitizer still does...

Alright so my sister is clumsy and dropped her ipad, the screen shows nothing and once and awhile on a reboot for a split second goes blue and it is apparently the boot screen, it then goes totally dark. I have trouble shooted a little and found that it actually turns on and everything is working except the screen.

What I'm thinking is a connector or ribbon cable became unseated during the fall.

What's your opinion?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

sounds like a back light issue to me.

1 of 2 things can fix this.

1. install a new screen assembly and its easy as that :)

2. the backlight IC is damamged on the mother board. this will entail that it needs an advanced repair done that requires very skilled hands.

try the first one and see if that works, but if not look on ebay or local repair shops if you need to do number 2.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

Try replacing the LCD only. Not the assembly. the screen isn't an assembly on the ipad 2 if these other two do not work.

1. Something similar happened to my friends IPhone and I just disconnected the lcd cable and reconnected, disconnected the battery, and it worked afterwards.

2. it might need a new display data cable only, but I'm not sure how that would get damaged during the fall

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,024