Saltar al contenido principal
Ayuda

Versión actual por: oldturkey03 (detalles del voto) ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open

Respuesta Aceptada:

96133

Editado por: Christian Hofmann ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open

Respuesta Aceptada:

112821

Editado por: Christian Hofmann ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open

Respuesta Aceptada:

112821

Editado por: originalmachead ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open

Editado por: originalmachead ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open

Aporte original por: Christian Hofmann ,

Título:

After changing HDD, CPU fan goes to 3500 rpm on power-on

Texto:

Hi,

I just removed my old HDD, just to install an SDD in the HDD slot, and an HDD (1TB SATA on SATA-to-IDE-cart) in my Optical Slot.

Everything seems to have gone smoothly, except... For seemingly no reason, my CPU fan goes to 3500 (CPU at 30-60°C), and my HDD fan to 1300 (HDD at 50°C). I think, at least the CPU fan shouldn't do so...

I already tried resetting the SMC, and reopened it to look if I maybe removed or forgot to reattach a temperature sensor, but both did not bring any solution at all.

Any Ideas?

Thank you!

Dispositivo:

iMac Intel 24" EMC 2134 and 2211

Estatus:

open