Saltar al contenido principal
Ayuda

Versión actual por: Brent Huff ,

Título:

Power Button won't work

Texto:

Got a broken screen iPad 2, ordered the parts and did the repair myself. I have done multiple iPad 2 screens, so I am pretty familiar with it. This time, however, I seemed to have clipped the Power Button/Volume Button flex cable when getting the broken screen off. Went ahead and bought a new cable. Just installed it so that I could get the iPad back together and came across a really weird issue. Actually I ordered 2 power button flex cables. When I put it on and clipped it in the volume buttons work and the mute switch works, but the power button does not. I unplugged it from the board and plugged it back in. Nothing. Cannot get it to bring up power off info and cannot get it to lock/unlock. Tried the 2nd cable I purchased thinking maybe it was a bad cable...same exact thing. Any ideas?
- == Update ==
+== Update ==
- Apparently the flex cable was defective. Supplier sent new ones and they work great. Thanks!
+Apparently the flex cable was defective. Supplier sent new ones and they work great. Thanks!

Dispositivo:

iPad 2 GSM

Estatus:

open

Respuesta Aceptada:

+88135

Editado por: Brent Huff ,

Título:

Power Button won't work

Texto:

Got a broken screen iPad 2, ordered the parts and did the repair myself. I have done multiple iPad 2 screens, so I am pretty familiar with it. This time, however, I seemed to have clipped the Power Button/Volume Button flex cable when getting the broken screen off. Went ahead and bought a new cable. Just installed it so that I could get the iPad back together and came across a really weird issue. Actually I ordered 2 power button flex cables. When I put it on and clipped it in the volume buttons work and the mute switch works, but the power button does not. I unplugged it from the board and plugged it back in. Nothing. Cannot get it to bring up power off info and cannot get it to lock/unlock. Tried the 2nd cable I purchased thinking maybe it was a bad cable...same exact thing. Any ideas?
+
+ == Update ==
+
+ Apparently the flex cable was defective. Supplier sent new ones and they work great. Thanks!

Dispositivo:

iPad 2 GSM

Estatus:

open

Aporte original por: Brent Huff ,

Título:

Power Button won't work

Texto:

Got a broken screen iPad 2, ordered the parts and did the repair myself.  I have done multiple iPad 2 screens, so I am pretty familiar with it.  This time, however, I seemed to have clipped the Power Button/Volume Button flex cable when getting the broken screen off.  Went ahead and bought a new cable.  Just installed it so that I could get the iPad back together and came across a really weird issue.  Actually I ordered 2 power button flex cables.  When I put it on and clipped it in the volume buttons work and the mute switch works, but the power button does not. I unplugged it from the board and plugged it back in.  Nothing.  Cannot get it to bring up power off info and cannot get it to lock/unlock.  Tried the 2nd cable I purchased thinking maybe it was a bad cable...same exact thing.  Any ideas?

Dispositivo:

iPad 2 GSM

Estatus:

open