Refusing to charge with clean port: phone indicates power received
Texto:
I have an iPhone 8 Plus that isn’t charging through the cable. There was debris, so I cleaned it out and used an iFixit guide to clean the contacts with a small cotton toothpick and alcohol. However, the phone is not charging.
What’s interesting is that I have jailbroken it in the past and installed the tweak “System Info” which lets me see the true status of the Tristar and battery. Under the info for the Tristar, when the phone is connected to power, it does show that it recognizes power is being fed. However, the status bar doesn’t show the charge symbol, and the battery ends up draining. A screenshot of System Info while power is attached is shown below.
[image|3252095]
Additionally, when the phone is completely dead, the charger is recognized with the screen only showing the large battery symbal and not a connection diagram. When iOS is booted however, the phone refuses charge.
A wireless charger does successfully charge the phone, but I still want a hardwired charging connection as wireless can be unreliable. I have replaced the battery in this phone with an iFixit-branded battery before. I have also tried a hard reset to no avail.
Anything else I can try first instead of buying a new port assembly?
Refusing to charge with clean port: phone indicates power received
Texto:
I have an iPhone 8 Plus that isn’t charging through the cable. There was debris, so I cleaned it out and used an iFixit guide to clean the contacts with a small cotton toothpick and alcohol. However, the phone is not charging.
What’s interesting is that I have jailbroken it in the past and installed the tweak “System Info” which lets me see the true status of the Tristar and battery. Under the info for the Tristar, when the phone is connected to power, it does show that it recognizes power is being fed. However, the status bar doesn’t show the charge symbol, and the battery ends up draining. A screenshot of System Info while power is attached is shown below.
[image|3252095]
-
A wireless charger does successfully charge but I still want a hardwired charging connection as wireless can be unreliable. I have replaced the battery in this phone with an iFixit-branded battery before. I have also tried a hard reset to no avail.
+
Additionally, when the phone is completely dead, the charger is recognized with the screen only showing the large battery symbal and not a connection diagram. When iOS is booted however, the phone refuses charge.
+
+
A wireless charger does successfully charge the phone, but I still want a hardwired charging connection as wireless can be unreliable. I have replaced the battery in this phone with an iFixit-branded battery before. I have also tried a hard reset to no avail.
Anything else I can try first instead of buying a new port assembly?
Refusing to charge with clean port: phone indicates power received
Texto:
I have an iPhone 8 Plus that isn’t charging through the cable. There was debris, so I cleaned it out and used an iFixit guide to clean the contacts with a small cotton toothpick and alcohol. However, the phone is not charging.
What’s interesting is that I have jailbroken it in the past and installed the tweak “System Info” which lets me see the true status of the Tristar and battery. Under the info for the Tristar, when the phone is connected to power, it does show that it recognizes power is being fed. However, the status bar doesn’t show the charge symbol, and the battery ends up draining. A screenshot of System Info while power is attached is shown below.
[image|3252095]
A wireless charger does successfully charge but I still want a hardwired charging connection as wireless can be unreliable. I have replaced the battery in this phone with an iFixit-branded battery before. I have also tried a hard reset to no avail.
Anything else I can try first instead of buying a new port assembly?