Saltar al contenido principal
Ayuda

Versión actual por: Charles Dill ,

Título:

Can anyone tell me how to replace board mounted USB3 B socket?

Texto:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Dispositivo:

Soldering

Estatus:

open

Respuesta Aceptada:

686429

Editado por: Charles Dill ,

Título:

Can anyone tell me how to replace board mounted USB3 B portsocket?
Can anyone tell me how to replace board mounted USB3 B portsocket?

Texto:

My Fujitsu IX500 scanner was working great, but the USB3 B female portsocket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.
My Fujitsu IX500 scanner was working great, but the USB3 B female portsocket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Dispositivo:

Soldering

Estatus:

open

Editado por: Charles Dill ,

Título:

Can anyone tell me how to replace board mounted USBUSB3 B port?
Can anyone tell me how to replace board mounted USBUSB3 B port?

Texto:

My Fujitsu IX500 scanner was working great, but the USBUSB3 B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.
My Fujitsu IX500 scanner was working great, but the USBUSB3 B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Dispositivo:

Soldering

Estatus:

open

Aporte original por: Charles Dill ,

Título:

Can anyone tell me how to replace board mounted USB B port?

Texto:

My Fujitsu IX500 scanner was working great, but the USB B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Dispositivo:

Soldering

Estatus:

open