Saltar al contenido principal
Ayuda

Versión actual por: Glenn Woods ,

Título:

Need help with metal connector soldering repair

Texto:

Heya Group,
I really need some help.
I bought a collectors statue from North America and shipped to Mentone, Victoria.
The statue requires assembly and has LED light display throughout.
Part of the assembly is connecting parts to the slot in the base of the statue.
The slot has a connector which has 1 broken prong and obviously does not allow the top half of the statue to light up.
+
+The statue takes 6 AA batteries at the rear of the base and the broken metal connector that connects to the top half of the statue is in the center slot.
Please see attached photos and please if anyone can tell me who can repair the broken connector. I have phoned around to many places (phone repair, PC repair) and have hit dead ends.
Can anyone please help. :-(
[image|2241529]
[image|2241528]
[image|2241527]

Dispositivo:

Soldering

Estatus:

open

Editado por: Glenn Woods ,

Título:

-Need help with connector repair
+Need help with metal connector soldering repair

Texto:

Heya Group,

I really need some help.

I bought a collectors statue from North America and shipped to Mentone, Victoria.

The statue requires assembly and has LED light display throughout.

Part of the assembly is connecting parts to the slot in the base of the statue.

The slot has a connector which has 1 broken prong and obviously does not allow the top half of the statue to light up.

Please see attached photos and please if anyone can tell me who can repair the broken connector. I have phoned around to many places (phone repair, PC repair) and have hit dead ends.

Can anyone please help. :-(

[image|2241529]

[image|2241528]

[image|2241527]

Dispositivo:

Soldering

Estatus:

open

Editado por: Glenn Woods ,

Título:

-Need help with connector reair
+Need help with connector repair

Texto:

Heya Group,

I really need some help.

I bought a collectors statue from North America and shipped to Mentone, Victoria.

The statue requires assembly and has LED light display throughout.

Part of the assembly is connecting parts to the slot in the base of the statue.

The slot has a connector which has 1 broken prong and obviously does not allow the top half of the statue to light up.

Please see attached photos and please if anyone can tell me who can repair the broken connector. I have phoned around to many places (phone repair, PC repair) and have hit dead ends.

Can anyone please help. :-(

[image|2241529]

[image|2241528]

[image|2241527]

Dispositivo:

Soldering

Estatus:

open

Aporte original por: Glenn Woods ,

Título:

Need help with connector reair

Texto:

Heya Group,

I really need some help.

I bought a collectors statue from North America and shipped to Mentone, Victoria.

The statue requires assembly and has LED light display throughout.

Part of the assembly is connecting parts to the slot in the base of the statue.

The slot has a connector which has 1 broken prong and obviously does not allow the top half of the statue to light up.

Please see attached photos and please if anyone can tell me who can repair the broken connector. I have phoned around to many places (phone repair, PC repair) and have hit dead ends.

Can anyone please help. :-(

[image|2241529]

[image|2241528]

[image|2241527]

Dispositivo:

Soldering

Estatus:

open