Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Aporte original por: DunCanP ,

Texto:

One other item.  It’s possible you have more than one USB connector and that only this particular “bank” of USB connectors are damaged/destroyed.  If you have others that work, you can consider putting a USB Hub to expand your ports if needed as a stop gap measure to repairing your board.

Dan, however, is very right that a pop clearly states a blow fuse/cap/IC component.  If you aren’t good with a soldering iron or heat gun, this is outside your scope of DIY repair.

Estatus:

open