Saltar al contenido principal
Ayuda

Versión actual por: Walter Galan ,

Título:

Broke vertical sync cable on reinstall... possible fix?

Texto:

Hello everybody,

While reinstalling my display into my iMac, I broke one of the 4 thin strips of metal that comes out of the vertical sync cable. I only noticed this after restarting the computer and hearing a weird high-pitched ringing noise (and researching the issue, apparently this is a problem on many stock iMacs). The display itself appears to work fine, so I don't want to make things worse, but is it possible to cut the cable and strip the protective coating, making the cable viable again?

Thanks!

Dispositivo:

-iMac Intel 27" EMC 2309 and 2374 and 2390
+iMac Intel 27" EMC 2309 and 2374

Estatus:

open

Respuesta Aceptada:

64590

Editado por: Walter Galan ,

Título:

Broke vertical sync cable on reinstall... possible fix?

Texto:

Hello everybody,

While reinstalling my display into my iMac, I broke one of the 4 thin strips of metal that comes out of the vertical sync cable. I only noticed this after restarting the computer and hearing a weird high-pitched ringing noise (and researching the issue, apparently this is a problem on many stock iMacs). The display itself appears to work fine, so I don't want to make things worse, but is it possible to cut the cable and strip the protective coating, making the cable viable again?

Thanks!

Dispositivo:

-iMac Intel 27"
+iMac Intel 27" EMC 2309 and 2374 and 2390

Estatus:

open

Respuesta Aceptada:

64590

Editado por: Adam Hintz ,

Título:

Broke vertical sync cable on reinstall... possible fix?

Texto:

Hello everybody,

While reinstalling my display into my iMac, I broke one of the 4 thin strips of metal that comes out of the vertical sync cable. I only noticed this after restarting the computer and hearing a weird high-pitched ringing noise (and researching the issue, apparently this is a problem on many stock iMacs). The display itself appears to work fine, so I don't want to make things worse, but is it possible to cut the cable and strip the protective coating, making the cable viable again?

Thanks!

Dispositivo:

iMac Intel 27"

Estatus:

open

Respuesta Aceptada:

+64590

Aporte original por: Adam Hintz ,

Título:

Broke vertical sync cable on reinstall... possible fix?

Texto:

Hello everybody,

While reinstalling my display into my iMac, I broke one of the 4 thin strips of metal that comes out of the vertical sync cable. I only noticed this after restarting the computer and hearing a weird high-pitched ringing noise (and researching the issue, apparently this is a problem on many stock iMacs). The display itself appears to work fine, so I don't want to make things worse, but is it possible to cut the cable and strip the protective coating, making the cable viable again?

Thanks!

Dispositivo:

iMac Intel 27"

Estatus:

open