Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: mc203e ,

Texto:

Very carefully drill the head off the screw and then you can pop it open with out damaging the screwcase. I had to do this with two screws. i was going to try and heat the screws first with soldering iron to see if that loosened them up enough to back them out but my tip was too large.
Very carefully drill the head off the screw and then you can pop it open with out damaging the screwcase. I had to do this with two screws. i was going to try and heat the screws first with soldering iron to see if that loosened them up enough to back them out but my tip was too large.

Estatus:

open

Aporte original por: mc203e ,

Texto:

Very carefully drill the head off the screw and then you can pop it open with out damaging the screw. I had to do this with two screws.  i was going to try and heat the screws first with soldering iron to see if that loosened them up enough to back them out but my tip was too large.

Estatus:

open